Agricultural tires are extremely important for the operation and development of the field. They are the ones who carry out the movement of agricultural machines responsible for practically the entire cycle of the most varied cultures implemented in Brazilian soil.
Because of this, more than redoubled care is needed when we are talking about these indispensable accessories for Brazilian agribusiness. In this way, in order to avoid headaches, it is necessary to understand that preventive maintenance is the best way to avoid corrective actions that, in addition to being much more costly financially, are also often much more complex than simply changing the tire. .
So, if you want to know more about this subject, stay with us and check, below, the 4 care that should be taken in the maintenance of agricultural tires. Follow:
1. Storage
Even not in use, agricultural tires need a lot of care in storage. In addition to avoiding material waste, a well-stored tire prevents damage to both the machine in which it will be inserted and the destination of the same machine.
The storage of new agricultural tires is important to maintain their factory characteristics.
Tires, inner tubes, valves, rims and wheels must be stored indoors and indoors. one must avoid storing the already mounted tire.
It is also advisable to keep it away from grease, oil and water. As well as distance from electric motors is necessary, due to the release of harmful gases to tire components.
2. Follow the manufacturer’s calibration
Soil compaction is directly linked to poor tire inflation. Because of this, it is of great importance that the manufacturer’s recommendations are faithfully followed, carrying out the necessary maintenance, in order to avoid future complications.
There are situations resulting from a bad calibration that are well known to farmers, such as:
- tire deformation
- Loss of traction ability
- Tire marks on the ground
- Rim slip, i.e. tire running out of rim
And that’s only if it’s low pressure. When we are faced with a high pressure calibration, it is very common for the tire to present an oval shape, to wear out faster and irregularly, in addition to considerably reducing the traction force. Because of these situations, the manufacturer’s recommendations must be strictly followed.
No video below, the tip is in relation to the water use when calibrating agricultural tires:
Source: JEDI8690 Machines.
3. Always monitor the internal tire pressure
Even when following the calibration of the manufacturers, it is necessary that there is a continuous monitoring of the internal pressure of the tires. It is best to carry out this verification weekly, before starting to work in the field. It is also advisable to use a pressure gauge to facilitate the operation.
4. Don’t hesitate to switch!
No matter how careful you are and carry out all the prevention procedures, at one time or another it will be necessary to change the tires. For this, it is enough to follow the behavior of the vehicle and notice signs, such as the reduction in the traction capacity and the wear of the drawbars.
Changing tires guarantees safety to operators and good operation of tractors.
It is very important to change the tire and not try to prolong its life, as actions like this can compromise the operation of the tractors and, consequently, the entire work of the field team. A tire in bad condition can cause accidents and risk the lives of the tractor driver and people involved in the operation in the field.
Did you like today’s tips on agricultural tire maintenance? Enter our website and stay on top of much more!
Take the opportunity and take a look at the offers of our partners and get in touch by clicking on contact the seller.
